Dry riser maintenance and dry riser testing should be carried out by qualified and trained engineering specialists to ensure the dry riser maintenance and testing is accurate, precise and reliable. It is important for dry riser maintenance and dry riser testing is done on your premises regularly and recorded so they are useful in case of emergency situation and to prevent any fire safety risks. It is recommended for dry riser maintenance to be carried out every 6 months or so to check for malicious or accidental damage or for general faults with the dry riser maintenance equipment. Dry riser maintenance should also be checked and tested for water pressure regularly every year to ensure the water supply pipes and outlets are working normally and have a high enough pressure for emergency fire services to pump water out of the dry riser maintenance in the unforeseeable event of a fire.
There are two main types, wet and dry riser maintenance, where both have it’s own requirements and benefits. Dry riser maintenance involves checking inlets, landing valves, drain valves, door hinges and locking arrangements. During the dry riser maintenance, particular attention should be paid to checking the valves, spindle glands and washers thoroughly to ensure they are in good working order so that the dry riser maintenance equipment can be quickly deployed for immediate use. For wet riser mains, the maintenance involves everything that is required on the dry riser maintenance check as well as checking the storage tanks for cleanliness of water, pipes and storage and checking the booster pumps and other mechanical and electrical equipment are in full working condition.
If you’re looking to install wet or dry risers, then the building must have sufficient space above ground level typically at least 11metres above ground level. To check if it is possible to install dry or wet mains, you may need to carry out dry riser testing. Before you proceed with the dry riser maintenance installation, ensure the engineers are all certified in the latest Construction Skills Certification Scheme (CSCS), are fully trained and hold relevant PASMA and IPAF cards, and the dry riser maintenance equipment are installed in accordance with minimum BS standards.
Dry riser maintenance should be accurate and precise as well as reliable and resourceful. If you ever need dry riser testing which is of a superlative calibre then it is crucial that you visit falcon-fire.co.uk.